솔루션 찾기 기술 지원

Photovoltaic

Photovoltaic IconEfficiency is one of the major challenges that solar energy installations must address – not only from a technical, but also from an economic standpoint.

Cost-optimized driver solutions are realized using Power Integrations' highly-integrated SCALE and SCALE-2 gate drivers, which enable a significant reduction in both component count and PCB size over typical solutions based on discrete driver stages. Integration also results in increased reliability as fewer components means less potential causes for malfunction. Therefore, the overall system MTBF (Mean Time Between Failure) is improved using SCALE and SCALE-2 gate drivers.

One of the technical challenges related to solar applications concerns over-voltage protection.

During normal operation – when the load is connected at standard temperatures - the DC-link voltage of a solar inverter is relatively low compared to the maximum blocking capability of the power switches. Therefore, there is enough voltage ‘headroom’ to handle any over-voltages that may occur when the power switches are turned off. Reliable protection of these switches using active clamping methods is, therefore, easy to achieve.

However, the open circuit voltage of a solar inverter (more precisely, of the solar panels), in particular at low temperatures, can lead to an increased DC-link voltage close to the maximum blocking capability of the power switches. During this period any standard active clamping circuit could cause an unintended turn-on of the power switches. In the best case, this would result in additional losses and increased EMI - however in a worst-case-scenario the result could be the complete destruction of the solar converter.

To address this situation, Power Integrations has developed a sophisticated active clamping technique, named ‘Dynamic Advanced Active Clamping (DA²C)’, which activates and deactivates the clamping function automatically, allowing solar inverter to operate safely under all application conditions (see figure 2).

 

Fig. 2 Dynamic Advanced Active Clamping (DA²C)

레퍼런스 디자인

Additional Documents
디자인
제품
RDHP-2102 - General Purpose Base Board for SCALE-iDriver SIC1182K
Product SIC1182K

관련 상품

Related Products
제품
데이터 시트
토폴로지
설명
Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

단일 LV100(Mitsubishi), XHP™ 2(Infineon), HPnC(Fuji) 및 동등한 반도체 모듈(최대 2300V 차단 전압)의 작동을 위한 듀얼 채널 플러그 앤 플레이 게이트 드라이버로, 전기 인터페이스, NTC 읽기 및 내장 DC-DC 전원을 갖추고 있습니다.

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

Gate Driver for Driving 62mm SiC-MOSFET and Si-IGBT modules up to 1700 V via Electrical Interface

Topology 2-level Voltage Source
Description

전기적 인터페이스를 통한 NTC(마이너스 온도 계수) 온도 센싱 기능이 있는 하프 브리지 전력 모듈을 구동하기 위한 듀얼 플러그 앤 플레이 게이트 드라이버

Topology 2-level Voltage Source
Description

EconoDUAL™ 및 동급 17mm 모듈용 듀얼 플러그 앤 플레이 게이트 드라이버, 특히 3~5MW 범위의 해상 풍력 터빈에 적합

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1
Description

최대 3.3kV의 100x140mm IGBT 모듈용 플러그 앤 플레이 게이트 드라이버, 특히 전기 철도 열차 및 트램에 적합합니다.

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

최대 3.3kV의 100x40mm IGBT/SiC 모듈 병렬 연결을 위한 플러그 앤 플레이 게이트 드라이버

Topology Any
Description

최대 1200V의 강화 절연을 제공하는 SCALE-iDriver 게이트 드라이버 IC용 DC/DC 트랜스포머

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

향상된 액티브 클램핑 및 최대 1200V의 강화 절연을 제공하는 최대 8A 단일 채널 SiC MOSFET 게이트 드라이버

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1
Description

1200V 및 1700 V PrimePACK3+ IGBT 모듈용 듀얼 채널 SCALE-2 플러그 앤 플레이 드라이버

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Up to 5 A Single Channel IGBT/MOSFET Gate Driver Providing Reinforced Isolation up to 1200 V IGBT and MOSFET

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

강화된 갈바닉 절연 성능을 갖춘 최대 8A의 단일 채널 IGBT/MOSFET 게이트 드라이버

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Smallest IGBT gate-driver for 90 kW-500 kW inverters, SCALE-2+ Technology, galvanic solution for 1200 V IGBT drivers, advanced active clamping or SSD

Topology 2-level Voltage Source
Description

Dual-channel SCALE-2+ driver core, highest integration level for inverter designs from 37 to 110 kVA, integrated short-circuit soft shutdown function

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Plug-and-Play Driver for PrimePACK™ IGBT Modules, Electrical or Fiber-Optic Interface, Embedded Paralleling Capability

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Plug-and-Play Driver for 17mm IGBT Modules, Full Function Across the Range, Embedded Paralleling Capability

Topology 2-level Voltage Source
Description

Dual-channel SCALE-2 driver core, highest integration level, second source for Infineon™ 2ED300C17-S, 30 A gate current and 2 x 4 W drive power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Driver Core for 3.3 kV IGBTs, highest intergration level, compact, high-voltage, high-power, 35 A gate current and 2 x 5 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2 driver core with Planar transformers, highest integration level, highest power density for high-power and high-frequency, 50 A gate current and 2 x 6 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2+ driver core used by new 2SC0435T2F1-17, 2SC0435T2G1-17, 2SC0435T2H0-17, highest integration level, ultra-compact, high-quality 35 A gate current, and 2 x 4 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2+ driver core, highest integration level ultra-compact, high-quality 8A gate current and 2 x 1 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Single-channel SCALE-2 driver core with Planar transformers, 60 A gate current for driving large IGBT modules in parallel, 20 W output power for high-frequency applications up to 500 kHz

추가 문서