2SP0215F2Q0C-FF900R12ME7W_B11
ASIL-certified plug-and-play dual-channel gate driver boards for Infineon™ EconoDUAL™ 17-mm IGBT power modules up to 1200 V
应用
产品详情
The 2SP0215F2Q0C is a dual channel gate driver for Infineon™ EconoDUAL™ 17 mm modules driving IGBT switches. The Plug-and-Play gate driver board is designed for applications requiring automotive qualification like electronic buses, electronic trucks, battery electrical vehicles, hybrid electrical vehicles or fuel cell inverters operating up to 1000 V battery voltage.
The gate driver provides automotive related protection functionalities and diagnostics. A galvanic isolated IGBT module integrated NTC read-out provides IGBT module temperature information.
Product Highlights
- Ready-to-use dual channel gate driver solution for EconoDUAL™
- 7 mm IGBT power modules up to 1200 V
- Primary-side electrical interface with reinforced isolation
- +20 A / -15 A peak output gate current
- Up to 20 kHz switching frequency
- Gate power of 1.5 W per channel at maximum ambient temperature
- Digital Communication Interface
- -40 °C to +85 °C operating ambient temperature
- Operation up to 5500 m altitude
- High common-mode transient immunity
Protection, Safety and Diagnostic Features
- 5 V input logic
- DC-link Active Discharge (AD) function (Optional)
- Motor Active Short Circuit (ASC) function (Optional)
- Galvanically isolated analog temperature measurement for module integrated NTC elements
- Rail-to-rail stabilized secondary-side output voltage
- Integrated FluxLink™ technology providing reinforced isolation barrier between primary-side and secondary-side
- Advanced Resistive Overvoltage Control (AROC) controlled soft turn-off in response to any critical failure
- Internal communication monitoring
- Undervoltage monitoring (UVLO) for primary-side and secondary-side
- Secondary-side overvoltage monitoring (OVLO)
- Gate monitoring
- Two-stage primary-side and secondary-side die temperature monitoring
- Desaturation monitoring
- DC/DC controller over current monitoring
- Separate isolated digital failure and status outputs
- Active Miller clamp
- Conformal coating
Full Safety and Regulatory Compliance
- ASIL-B certification (pending)
- Clearance and creepage distances between primary and secondary sides meet requirements for reinforced isolation (according to IEC 60664-1, IEC 60664-3)
- SEooC product certification (pending)
- 100% production partial discharge test
- 100% production HIPOT testing at 4000 kVRMS for 1 s
Applications
- E-Bus and E-Truck traction inverter
- Diesel-electric traction inverter
- Fuel cell inverter
- Agricultural and construction vehicles and equipment
- Other automotive and industrial applications
产品规格
支持的模块 | FF900R12ME7W_B11 |
IGBT电压等级 | 1200 V |
技术 | SCALE-2 |
产品类型 | 即插即用驱动器 |
输出功率/通道-最大 | 1.50 W |
运作温度 (最小) | -20 ℃ |
运作温度 (最大) | 50 ℃ |
接口类型 | 电气 |
模块外壳 | 17mm |
IGBT制造商 | Infineon |
通道数 | 2 |
门极峰值电流(最大) | +29 A |
产品类型 | 电路板 |
Product Sub-Type | 即插即用驱动器 |
支持的模块 | IGBT |
支持的拓扑 | 集成半桥 |
保护功能 |
高级有源钳位
过压
短路
欠压(次级侧)
欠压(初级侧)
|
驱动器监控 | 无 |
三防漆? | 是 |
IGBT的连接类型 | 直接 |
逻辑输入电压 | 5 |
电源电压 (典型) | 5.00 V |
门极导通电压 | +15.00 V |
门极关断电压 | -9.20 V |
电压 - 直流母线切换 | 1200.00 V |
時間 - 輸出上升 | 5.00 ns |
時間 - 輸出下降 | 10.00 ns |
封装 | 电路板 |
隔离技术 | 电隔离 |
隔离类型 | 加强型 |
存储温度(最低) | -40.00 ℃ |
存储温度(最高) | 50.00 ℃ |
ISO26262 功能安全等级 | ASIL B |