LCS7260C
HiperLCS-2 is a high efficiency, off-line LLC Switcher IC Chipset. It consists of:
- HiperLCS2-HB, a Half-bridge Power Device with Integrated 600 V FREDFETs, and
- HiperLCS2-SR, a Safety Isolation Device with Synchronous Rectification and FluxLink Feedback
Note: HiperLCS-2 can easily pair with the HiperPFS-5 PFC IC.
Product Details
Description
The HiperLCS™-2 family of IC chipsets dramatically simplifies the design and manufacture of LLC resonant power converters, particularly those requiring high efficiency and/or compact size and delivering up to 220 W continuous output power with no heat sink. The HiperLCS2-HB (LCS72xxC) primary-side devices incorporate 600 V FREDFET in a half bridge arrangement with control, level shifting, drive and self-powered start-up. The HiperLCS2-SR (LSR2000C) master controller device provides reinforced isolated feedback, output sensing and SR management.
HiperLCS-2 family devices incorporate multiple protection features including: line over and undervoltage protection, output overvoltage and over-temperature shutdown. Device fault response options support common combinations of latching and auto-restart behaviors required by applications such as chargers,
Product Highlights
Highly Integrated, Compact Footprint
- Up to 98.1% efficiency
- Very low component count and small footprint package
- Eliminates heatsink up to 220 W continuous
- Self-powered start-up
- 600 V FREDFET, rugged fast recovery body diode, current sensing
- HB Auto dead-time and hard switch detect
- Selectable center frequency (90, 120, 180, 240 kHz)
- Secondary-side sensing and feedback control with fast transient response
- Synchronous rectification driver
- Integrated FluxLink™, HIPOT-isolated control link
EcoSmart™ – Energy Efficient
- As low as 41 mW no-load including line sense
- Output always in regulation, 0-100% load step
- Easily meets all global energy efficiency regulations
Advanced Protection / Safety Features
- HB and SR shoot-through protection
- Power-up pin open/short check
- System short-circuit, thermal, HB OCP, FB open, fast input line UV/OV and PMAX protection
Optional Features
- Auto-restart or latching fault response for output OVP/UVP
- Latching or hysteretic primary over-temperature protection
- External fault detect and remote on/off
- Inrush-relay drive output pin
- Provides start-up bias for PFC stage
Full Safety and Regulatory Compliance
- Reinforced isolation, isolation voltage >4000 VAC
- UL1577, CQC and TUV (EN62368-1) safety approved
Applications
- High efficiency power supplies up to 220 W continuous
- Consumer electronics − TV, PC, e-bike and tool chargers
Specifications
| Output Power (Max) - Peak, 380V | 120.00 W |
| Output Power (Max) - Continuous, 380V | 80.00 W |
| Breakdown Voltage | 600 V |
| Voltage - Output (Min) | 5.00 V |
| Voltage Input (Max, DC) | 440.00V |
| Voltage Input (Min, DC) | 345.00V |
| Auto-Restart & Overvoltage Response | Auto-restart |
| IC Package | InSOP-24C |
| Internal Switch | Yes |
| Temperature - Operating (Min) | -40 °C |
| Temperature - Operating (Max) | 150 °C |
| Protection Features |
Input Undervoltage
Open SR FET Detection
Output Overload
Output Overvoltage
Output Short Circuit
Overtemperature
|
| Output Profile | CV |
| Topology | LLC Half Bridge |
| Product Sub-Type | PMIC |
| MSL Rating | 3 |
