Solution Finder Get Tech Support

2SP0430T2A0C-FF2400R12IP7

Dual-Channel SCALE-2 Plug-and-Play Driver for 1200 V, 1700 V and 2300 V PrimePACK™ 3+ IGBT Modules

Applications

Product Details

The plug-and-play 2SP0430 gate driver family is optimized for operation of 1200 V, 1700 V and 2300 V PrimePACK™ 3+ IGBT power modules in 2-level and 3-level applications.

The gate driver features an electrical interface with 15 V logic and built-in DC/DC power supply.

Power Integrations' Dynamic Advanced Active Clamping allows an extended DC-link voltage range in IGBT off-state for up to 60 s in PV and regenerating applications (e.g. traction).

Product Highlights

 

Highly Integrated, Compact Footprint

  • Ready-to-use date driver solution for PrimePACK 3+ IGBT power modules with 1200 V and 1700 V blocking voltage
  • Dual channel gate driver
  • Electrical primary-side interface with reinforced insolation
  • Available for 2-level and 3-level applications
  • ±30 A peak output gate current
  • 2 W output power per channel at maximum ambient temperature
  • -40 ºC to +85 ºC operating ambient temperature

Production and Safety Features

  • Reinforced insulation between primary and secondary side
  • Undervoltage lock-out (UVLO) protection for primary side (low voltage side)
  • Short-circuit protection
  • Dynamic Advanced Active Clamping (DA²C)
  • Applied double sided conformal coating

Full Safety and Regulatory Compliance

  • 100% production partial discharge and HIPOT test
  • Clearance and creepage distances between primary and secondary sides meet requirements for reinforced isolation.

Applications

  • Wind and PV power
  • Traction inverter
  • Industrial drives
  • Other industrial applications

Specifications

Specifications
Supported Module(s) FF2400R12IP7
Max Switching Frequency 10.00 kHz
IGBT Voltage Class 1200 V
Technology SCALE-2
Power - Output/Channel (Max) 2.00 W
Interface Type Electrical
Module Housing PrimePACK™ 3+
IGBT Manufacturer Infineon
Number of Channels 2
Gate Peak Current (Max) +30 A
Product Type Board
Product Sub-Type PnP Driver
Supported Module Type IGBT
Supported Topologies
2-level Voltage Source
3-level NP-Clamped - Type 1
Protection Features
Dynamic Adv Active Clamping
Short Circuit
UVLO(Sec-side)
UVLO(Pri-side)
Conformal Coated? Yes
Driving Mode Direct-Independent
Connection Type to IGBT Direct
Gate Turn-on Voltage +15.00 V
Voltage - DC Link Off state (60s) 1100.00 V
Isolation Technology Galvanic
Isolation Type Reinforced