1SP0635D2S1-FZ1600R17HP4_B2
Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter
Product Details
1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1SP0635V, equipped with Versatile links
- 1SP0635S, equipped with ST links
For details, please check the product documentation.
Specifications
| Supported Module(s) | FZ1600R17HP4_B2 |
| Max Switching Frequency | 7.00 kHz |
| IGBT Voltage Class | 1700 V |
| Technology | SCALE-2 |
| Power - Output/Channel (Max) | 2.60 W |
| Temperature - Operating (Min) | -40 ℃ |
| Temperature - Operating (Max) | 85 ℃ |
| Interface Type | Electrical |
| IGBT Manufacturer | Infineon |
| Number of Channels | 1 |
| Gate Peak Current (Max) | +35 A |
| Product Type | Board |
| Product Sub-Type | PnP Driver |
| Supported Module Type | IGBT |
| Main/Peripheral | Peripheral |
| Supported Topologies |
2-level Voltage Source
3-level NP-Clamped - Type 1
3-level NP-Clamped - Type 2
Multi-Level NP-Clamped
|
| Protection Features |
Dynamic Adv Active Clamping
Over-voltage
UVLO(Sec-side)
|
| Driving Mode | Direct-Independent |
| Connection Type to IGBT | Direct |
| Logic Input Voltage | 15 |
| Gate Turn-on Voltage | +15.00 V |
| Gate Turn-off Voltage | --10.10 V |
| Voltage - DC Link Off state (60s) | 1480.00 V |
| Time - Output Rise | 9.00 ns |
| Time - Output Fall | 30.00 ns |
| Temperature - Storage (Min) | -40.00 ℃ |
| Temperature - Storage (Max) | 50.00 ℃ |
| Gate Peak Current (Min) | -35 |
