![SCALE-2 1SP0340 Module SCALE-2 1SP0340 Module](/sites/default/files/images/products/PI-1600x1200%402x_SCALE-2-1SP0340.png)
1SP0340D2S0C-FZ1200R45HL3
Single-Channel SCALE-2 Plug-and-Play for 4.5kV IGBTs, Direct Paralleling Supported by Master/Slave Drivers
產品詳情
The new 1SP0340 SCALE-2 Plug-and-Play driver is specifically designed for the reliable and safe driving of 130 x 140 mm and 190 x 140 mm IGBT modules with 6000 V isolation voltage and 4.5 kV blocking voltage. It is optimized for high-reliability applications in the rail industry.
The driver concept relies on a master/slave principle that enables parallel-connected IGBT modules to be operated safely. The master (1SP0340V) can be used as a stand-alone driver without slave to drive a single IGBT module, or with up to three slaves (1SP0340D) to drive up to four parallel-connected IGBT modules.
The master is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master via a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
The 1SP0340 driver is based on the highly-integrated SCALE-2 chipset which enables high-performance, complete and extremely-compact single-channel IGBT drivers.
The SCALE-2 chipset also reduces the component count by 80% when compared to conventional solutions, thus significantly increasing reliability and reducing costs.
1SP0340 drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, regulated turn-on gate driving voltage and supply-voltage-monitoring.
Tightly-matched driver versions are available for all mechanically-compatible IGBT modules. Plug-and-play capability enables immediate operation after mounting, and the user needs to invest no effort adjusting or designing-in the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to electrically isolate the command and status-feedback signals.
For details, please check the product documentation.
Power supply and electrical isolation
In contrast to other SCALE-2 plug-and-play drivers, the 1SP0340 driver is modular, so the driver card and power supply (ISO5125I DC/DC converter) are two separate units. This means that any driver that has been developed to match a specific IGBT module can be used for any required isolation specification. Only the separate power supply (ISO5125I) must be selected to match the specific application. A further benefit is that drivers for 4.5 kV IGBTs can be implemented in 2-level, 3-level and multi-level inverter topologies.
The driver is mounted directly onto the IGBT module using three screws. The separate power supply unit is attached close by the IGBT. For parallel-connected drivers, only one power supply is needed per switch.
產品規格
支持的模組 | FZ1200R45HL3 |
最大開關頻率 | 3.50 kHz |
IGBT電壓等級 | 4500 V |
技術 | SCALE-2 |
輸出功率/通道 - 最大 | 2.80 W |
接口類型 | 電氣 |
IGBT製造商 | Infineon |
通道數 | 1 |
閘極峰值電流 (最大) | +35 A |
產品類別 | 電路板 |
Product Sub-Type | 隨插即用驅動器 |
支持的模組種類 | IGBT |
主/外圍 | 外圍 |
支持的拓撲 |
兩電平電壓源
三電平NP鉗位 - 類型1
三電平NP鉗位 - 類型2
多電平NP鉗位
|
保護功能 |
動態高級有源鉗位
過壓
欠壓(次級側)
|
保形塗層? | 是 |
驅動模式 | 直接獨立 |
IGBT的連接類型 | 直接 |
邏輯輸入電壓 | 14 |
電源電壓 (典型) | 25.00 V |
閘極導通電壓 | +15.00 V |
閘極關斷電壓 | --10.00 V |
電壓 - 直流母線關閉狀態, 60秒 | 3550.00 V |
時間 - 輸出上升 | 10.00 ns |
時間 - 輸出下降 | 25.00 ns |
閘極峰值電流 (最小) | -35 |