解决方案搜寻 技术支持

2SP0230T2A0-CM450DY-24T

Gate Driver for Driving 62mm SiC-MOSFET and Si-IGBT modules up to 1700 V via Electrical Interface

应用

产品详情

The Plug-and-Play 2SP0230T2x0 gate driver family is a compact double-channel gate driver designed for the operation of 62 mm half-bridge SiC and IGBT power modules up to 1700 V. The drivers feature electrical interface with built-in DC/DC power supplies. Power Integrations’ Advanced Active Clamping allows to turn-off safely within an extended DC-link voltage range.

This board requires a signal interface (Molex 53258-1029), available for order from Avnet, Digikey or Mouser.

Product Highlights

Highly Integrated, Compact Footprint

  • Ready-to-use gate driver solution for 62 mm half-bridge SiC and IGBT power modules
  • Dual channel gate driver
  • Electrical interface
  • The clearance and creepage distances are defined according to IEC60077-1 providing reinforced insulation up to 1700 V blocking voltage in 2-level applications and basic insulation for 3-level applications using modules up to 1200 V blocking voltage
  • ±30 A peak output gate current
  • 1.3 W output power per channel at maximum ambient temperature
  • -40 °C to 85 °C operating ambient temperature

Protection / Safety Features

  • Short-circuit protection
  • Advanced Active Clamping (AAC)
  • Undervoltage lock-out (UVLO) protection
  • RoHS compliant

产品规格

产品规格
支持的模块 CM450DY-24T
最大开关频率 92.00 kHz
IGBT电压等级 1200 V
技术 SCALE-2
输出功率/通道-最大 1.30 W
运作温度 (最小) -40 ℃
运作温度 (最大) 85 ℃
接口类型 电气
模块外壳 62mm
IGBT制造商 Mitsubishi
通道数 2
门极峰值电流(最大) +30 A
产品类型 电路板
Product Sub-Type 即插即用驱动器
支持的模块 IGBT
主/外围 N/A
支持的拓扑
两电平电压源
三电平NP钳位 - 类型1
三电平NP钳位 - 类型2
保护功能
高级有源钳位
过压
短路
欠压(次级侧)
欠压(初级侧)
驱动模式 直接独立
IGBT的连接类型 直接
逻辑输入电压 15
电源电压 (典型) 15.00 V
门极导通电压 +15.00 V
门极关断电压 -10.00 V
隔离技术 电隔离
隔离类型 加强型
存储温度(最低) -40.00 ℃
存储温度(最高) 50.00 ℃

相关资源