Application Notes

This manual describes the software implementation including driver libraries used to control InnoSwitch4-Pro operations. Important aspects of this document are calculations for the values to be programmed for various configurations such as voltage, current, cable drop compensation, constant power, I²C command sequences to prevent any unexpected behaviors, device responses and code examples.

本文档将介绍InnoSwitch4-Pro 产品系列PIC 库的应用。该库可用于InnoSwitch3-Pro和InnoSwitch4-Pro系列器件。该代码被设计为可与不同的微控制器平台高度兼容。

The application of InnoSwitch3-Pro and InnoSwitch4-Pro Family Arduino Library is discussed in this document. This code was designed to be highly portable with different microcontroller platforms.

通过本指南，用户可以充分了解如何实现器件与Arduino等简单的微控制器的协同工作。所用微控制器为Arduino Mega 2560，以满足主调试器文件的内存要求。Arduino Uno的内存不足以满足此应用的需要。

本手册是InnoSwitch3-Pro 配置板(TST-047) 的用户指南。 InnoSwitch4-Pro配置板也可用作控制InnoSwitch4-Pro电源的工具。本文档介绍了配置板的组成、工作原理以及如何与InnoSwitch4-Pro 系列器件配合使用。它还包含电路原理图、物料清单和印刷电路板布局。

本应用指南旨在帮助工程师TinySwitch-4系列器件设计AC-DC隔离反激 式开关电源。工程师可以利用本文所述的指导方法快速选择所需的关键 元件并至完成合适的变压器设计。

This application note provides information for designing a non-isolated power supply using the LinkSwitch-TNZ family of devices. This document describes the design procedure for buck and buck-boost converters.

This application note is intended to assist in designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3-PD device. It provides guidelines for selecting key components and the information necessary to complete a suitable transformer design.

This application note is intended as a design guide for engineers designing an isolated AC-DC single-stage flyback power supply using the MinE-CAP family of devices. It is assumed that the designer is using the MinE-CAP together with the InnoSwitch3 family of power conversion ICs. However, the design equations shown can be used for applications beyond the scope of this document.

This application note (AN) provides guidance for using LinkSwitch-XT2 and should be read in conjunction with and in the context of the LinkSwitch-XT2 family data sheet.

This application note (AN) provides guidance for using TinySwitch-III and should be read in conjunction with and in the context of the TinySwitch-III family data sheet.

This application note (AN) provides guidance for using TinySwitch-LT and should be read in conjunction with and in the context of the TinySwitch-LT family data sheet.

Provides guidance to developers on how to use an evaluation board (TST-047) to test and debug InnoSwitch3-Pro based power supplies.

This application note describes the use of a tool made using an Arduino-UNO and an LCD Display shield which enabled evaluation of the power stage made using InnoSwitch3-Pro.

本文件提供了InSOP-24和HSOP-28封装的波峰焊设计指南，特别是那些没有底部裸露焊盘的封装。尽管建议使用红外/对流回流焊进行表面贴装，但这两种封装在波峰焊不可用或不被首选时也可以使用。本文件提供了焊盘布局、焊盘之间的最大间距以及拖锡焊盘的方向和设计的建议。

This application note is intended for engineers designing an isolated AC-DC flyback power supply or charger using the InnoSwitch3 family of devices. It provides guidelines to enable an engineer to quickly select key components and also complete a suitable transformer design.

Download the code library: InnoSwitch3-Pro Code Library and API for Arduino

Download the code library: InnoSwitch3-Pro Code Library and API for Microchip PIC16F18325

Provides guidance to developers on how to program the InnoSwitch3-Pro product through its I²C interface.