2SP0320T2A0C-DP1400B1700TU103726
Dual-Channel SCALE-2 Plug-and-Play Driver for PrimePACK™ IGBT Modules, Electrical or Fiber-Optic Interface, Embedded Paralleling Capability
Product Details
2SP0320 is specifically targeted at PrimePACK™ IGBT modules. As a member of the SCALE-2 plug-and-play driver family, it satisfies industry’s requirements for optimized electrical performance and noise immunity.
The highly integrated SCALE-2 chipset reduces component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The use of SCALE-2 technology also means that 2SP0320 devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring.
Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realized without compromising overall system efficiency.
The embedded paralleling capability allows simple inverter design for higher power ratings.
Specifically adapted drivers are available for all IGBT module types. All drivers are available with electrical and fiber-optic interfaces.
Interface Options
The 2SP0320 driver series is available with one electrical and various fiber-optic interfaces.
Electrical Interface: 2SP0320T
The DIC20 electrical interface is very simple and easy to use.The driver has the following terminals:
- Power supply and GND terminals
- 2 x drive signal inputs
- 2 x status outputs (failure returns)
- 1 x mode selection (half-bridge mode / direct mode)
- 1 x input to set the blocking time
All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics.
Fiber-Optic Interfaces: 2SP0320V and 2SP0320S
Fiber-optic links are used for the electrical insulation of the command and status-feedback signals. Two versions are available:
- 2SP0320V equipped with Versatile links
- 2SP0320S equipped with ST links
For details, check the product documentation.
Driving Parallel-Connected IGBTs
The driver allows direct parallel connection of any number of PrimePACK modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.
Specifications
| Supported Module(s) | DP1400B1700TU103726 |
| Max Switching Frequency | 9.00 kHz |
| IGBT Voltage Class | 1700 V |
| Technology | SCALE-2 |
| Power - Output/Channel (Max) | 3.00 W |
| Interface Type | Electrical |
| IGBT Manufacturer | Danfoss |
| Number of Channels | 2 |
| Gate Peak Current (Max) | +20 A |
| Product Type | Board |
| Product Sub-Type | PnP Driver |
| Supported Module Type | IGBT |
| Main/Peripheral | N/A |
| Supported Topologies |
2-level Voltage Source
3-level NP-Clamped - Type 1
3-level NP-Clamped - Type 2
Multi-Level NP-Clamped
|
| Protection Features |
Adv Active Clamping
Over-voltage
Short Circuit
UVLO(Sec-side)
UVLO(Pri-side)
|
| Conformal Coated? | Yes |
| Driving Mode |
Halfbridge
Direct-Independent
|
| Connection Type to IGBT | Direct |
| Logic Input Voltage | 5 |
| Supply Voltage (Typ) | 15.00 V |
| Gate Turn-on Voltage | +15.00 V |
| Gate Turn-off Voltage | --10.40 V |
| Time - Output Rise | 7.00 ns |
| Time - Output Fall | 25.00 ns |
| Isolation Technology | Galvanic |
| Isolation Type | Reinforced |
| Gate Peak Current (Min) | -20 |
