Solution Finder Get Tech Support

2SD300C17A3C

Dual-channel SCALE-2 driver core, highest integration level, second source for Infineon™ 2ED300C17-S, 30 A gate current and 2 x 4 W drive power

Applications

Product Details

The new 2SD300C17 SCALE-2 dual-driver core is a second source for and is fully pin and function-compatible with Infineon's 2ED300C17-S. It targets high reliability applications.

Advantages of the Technology 

The use of CONCEPT's highly integrated SCALE-2 chipset uses 63% fewer components than the 2ED300C17-S. 

This results in a significant improvement in reliability (both calculated MTBF and measured) and reduced costs. The 2SD300C17 combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, failure soft shut down, short pulse suppression as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. 

The driver provides a gate voltage swing of ±15 V. An output current of 30 A and 4 W drive power is available per channel.

Excellent EMC performance with a dv/dt strength of more than 50 V/ns allows safe and reliable operation even in demanding industrial applications. 

Specifications

Specifications
Max Switching Frequency 60.00 kHz
IGBT Voltage Class 1700 V
Technology SCALE-2
Power - Output/Channel (Max) 4.00 W
Interface Type Electrical
Number of Channels 2
Gate Peak Current (Max) +30 A
Product Type Board
Product Sub-Type Driver Core
Supported Module Type IGBT
Main/Peripheral N/A
Supported Topologies 2-level Voltage Source
Protection Features
Adv Active Clamping
Short Circuit
Soft Shutdown
UVLO(Sec-side)
UVLO(Pri-side)
Conformal Coated? Yes
Driving Mode
Direct-Interlock
Direct-Independent
Logic Input Voltage 15
Supply Voltage (Typ) 15.00 V
Gate Turn-on Voltage +15.00 V
Gate Turn-off Voltage --15.00 V
Isolation Technology Galvanic
Isolation Type Reinforced
Gate Peak Current (Min) -30