![SCALE-2 1SP0635 Module SCALE-2 1SP0635 Module](/sites/default/files/images/products/PI-1600x1200%402x_SCALE-2-1SP0635.png)
1SP0635D2S1-FD1200R17KE3-K_B2
Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter
์ ํ ์์ธ ์ ๋ณด
1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1SP0635V, equipped with Versatile links
- 1SP0635S, equipped with ST links
For details, please check the product documentation.
๋ช ์ธ์
์ง์๋๋ ๋ชจ๋ | FD1200R17KE3-K_B2 |
์ต๋ ์ค์์นญ ์ฃผํ์ | 8.10 kHz |
IGBT ์ ์ ๋ฑ๊ธ | 1700 V |
๊ธฐ์ | SCALE-2 |
์ถ๋ ฅ ์ ๋ ฅ / ์ฑ๋-์ต๋ | 2.60 W |
์๋ ์จ๋ (์ต์) | -40 โ |
์๋ ์จ๋ (์ต๋) | 85 โ |
์ธํฐํ์ด์ค ์ ํ | ์ ๊ธฐ |
IGBT ์ ์กฐ์ ์ฒด | Infineon |
์ฑ๋ ์ | 1 |
๊ฒ์ดํธ ํผํฌ ์ ๋ฅ (์ต๋) | +35 A |
์ํ ์ ํ | ํ๋ก ๊ธฐํ |
Product Sub-Type | ํ๋ฌ๊ทธ ์ค ํ๋ ์ด ๋๋ผ์ด๋ฒ |
์ง์๋๋ ๋ชจ๋ ์ ํ | IGBT |
๋ฉ์ธ / ์ฃผ๋ณ | ์ฃผ๋ณ |
์ง์๋๋ ํ ํด๋ก์ง |
2๋จ๊ณ ์ ์ ์์ค
3๋จ๊ณ NP ํด๋จํ - ์ ํ 1
3๋จ๊ณ NP ํด๋จํ - ์ ํ 2
๋ค๋จ๊ณ NP ํด๋จํ
|
๋ณดํธ ๊ธฐ๋ฅ |
๋์ ๊ณ ๊ธ ๋ฅ๋ ํด๋จํ
๊ณผ์ ์
์ ์ ์ (2์ฐจ์ธก)
|
๋๋ผ์ด๋ธ ๋ชจ๋ | ์ง์ ๋ ๋ฆฝํ |
IGBT์ ๋ํ ์ฐ๊ฒฐ ์ ํ | Direct |
๋ ผ๋ฆฌ ์ ๋ ฅ ์ ์ | 15 |
๊ฒ์ดํธ ํด์จ ์ ์ | +15.00 V |
๊ฒ์ดํธ ํด ์คํ ์ ์ | --10.10 V |
์ ์ - DC ๋งํฌ ๊บผ์ง ์ํ, 60 ์ด | 1480.00 V |
์๊ฐ - ์ถ๋ ฅ ์์น | 9.00 ns |
์๊ฐ - ์ถ๋ ฅ ํ๋ฝ | 30.00 ns |
๋ณด๊ด ์จ๋ (์ต์) (ยฐC) | -40.00 โ |
๋ณด๊ด ์จ๋ (์ต๋) (ยฐC) | 50.00 โ |
๊ฒ์ดํธ ํผํฌ ์ ๋ฅ (์ต์) | -35 |