解决方案查找器 技術支援

2SP0215F2Q0C-FF900R12ME7W_B11

ASIL-certified plug-and-play dual-channel gate driver boards for Infineon™ EconoDUAL™ 17-mm IGBT power modules up to 1200 V

應用
產品規格型錄
下載 PDF 檢視 PDF

產品詳情

The 2SP0215F2Q0C is a dual channel gate driver for Infineon™ EconoDUAL™ 17 mm modules driving IGBT switches. The Plug-and-Play gate driver board is designed for applications requiring automotive qualification like electronic buses, electronic trucks, battery electrical vehicles, hybrid electrical vehicles or fuel cell inverters operating up to 1000 V battery voltage.

The gate driver provides automotive related protection functionalities and diagnostics. A galvanic isolated IGBT module integrated NTC read-out provides IGBT module temperature information.

Product Highlights

  • Ready-to-use dual channel gate driver solution for EconoDUAL™
  • 7 mm IGBT power modules up to 1200 V
  • Primary-side electrical interface with reinforced isolation
  • +20 A / -15 A peak output gate current
  • Up to 20 kHz switching frequency
  • Gate power of 1.5 W per channel at maximum ambient temperature
  • Digital Communication Interface
  • -40 °C to +85 °C operating ambient temperature
  • Operation up to 5500 m altitude
  • High common-mode transient immunity

Protection, Safety and Diagnostic Features

  • 5 V input logic
  • DC-link Active Discharge (AD) function (Optional)
  • Motor Active Short Circuit (ASC) function (Optional)
  • Galvanically isolated analog temperature measurement for module integrated NTC elements
  • Rail-to-rail stabilized secondary-side output voltage
  • Integrated FluxLink™ technology providing reinforced isolation barrier between primary-side and secondary-side
  • Advanced Resistive Overvoltage Control (AROC) controlled soft turn-off in response to any critical failure
  • Internal communication monitoring
  • Undervoltage monitoring (UVLO) for primary-side and secondary-side
  • Secondary-side overvoltage monitoring (OVLO)
  • Gate monitoring
  • Two-stage primary-side and secondary-side die temperature monitoring
  • Desaturation monitoring
  • DC/DC controller over current monitoring
  • Separate isolated digital failure and status outputs
  • Active Miller clamp
  • Conformal coating

Full Safety and Regulatory Compliance

  • ASIL-B certification (pending)
  • Clearance and creepage distances between primary and secondary sides meet requirements for reinforced isolation (according to IEC 60664-1, IEC 60664-3)
  • SEooC product certification (pending)
  • 100% production partial discharge test
  • 100% production HIPOT testing at 4000 kVRMS for 1 s

Applications

  • E-Bus and E-Truck traction inverter
  • Diesel-electric traction inverter
  • Fuel cell inverter
  • Agricultural and construction vehicles and equipment
  • Other automotive and industrial applications

產品規格

產品規格
支持的模組 FF900R12ME7W_B11
IGBT電壓等級 1200 V
技術 SCALE-2
輸出功率/通道 - 最大 1.50 W
運作溫度 (最小) -20 ℃
運作溫度 (最大) 50 ℃
接口類型 電氣
模組外殼 17mm
IGBT製造商 Infineon
通道數 2
閘極峰值電流 (最大) +29 A
產品類別 電路板
Product Sub-Type 隨插即用驅動器
支持的模組種類 IGBT
支持的拓撲 Integrated Half-Bridge
保護功能
高級有源鉗位
過壓
短路
欠壓(次級側)
欠壓(初級側)
驅動器監控
保形塗層?
IGBT的連接類型 直接
邏輯輸入電壓 5
電源電壓 (典型) 5.00 V
閘極導通電壓 +15.00 V
閘極關斷電壓 -9.20 V
電壓 - 直流母線切換 1200.00 V
時間 - 輸出上升 5.00 ns
時間 - 輸出下降 10.00 ns
封裝 電路板
隔離技術 電隔離
隔離類型 加強型
存儲溫度(最低) -40.00 ℃
存儲溫度(最高) 50.00 ℃
ISO26262 功能安全等級 ASIL B