解决方案查找器 技術支援

2SP0115T2A0-CM300DX-24T

Dual-Channel SCALE-2 Plug-and-Play Driver for 17mm IGBT Modules, Full Function Across the Range, Embedded Paralleling Capability

產品規格型錄
下載 PDF 檢視 PDF

產品詳情

2SP0115T is a ultra-compact driver series for 17mm as EconoDUAL™ IGBT modules. As a member Power Integrations' plug-and-play driver family, it satisfies industry’s requirements for optimized electrical performance and noise immunity. 

The highly integrated SCALE-2 chipset reduces the component count by 80% compared to conventional solutions, thus significantly increasing reliability and reducing cost. 

The use of SCALE-2 technology also means that 2SP0115T devices are complete two-channel IGBT drivers equipped with DC/DC converters, short-circuit protection, Advanced Active Clamping and supply-voltage monitoring. 

Users need only solder them onto the corresponding IGBT module. The system can then be put into immediate operation with no further development or matching engineering effort. This enables short design cycles to be realised without compromising overall system efficiency. 

The embedded paralleling capability allows simple inverter design for higher power ratings. 

Specifically adapted drivers are available for all module types. The DIC20 electrical interface is very simple and easy to use. 

Driving Parallel-Connected IGBTs

The driver allows direct parallel connection of any number of 17mm modules with individual drivers. This new, pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any additional development effort.

Electrical Interface DIC20

The 2SP0115T driver series is equipped with DIC20 electrical interface and is fully compatible with the PrimePACK™ driver series 2SP0320T. The DIC20 electrical interface is very simple and easy to use.

The driver has the following terminals:

  • Power supply and GND terminals
  • 2 x drive signal inputs
  • 2 x status outputs (failure returns)
  • 1 x mode selection (half-bridge mode / direct mode)
  • 1 x input to set the blocking time

All inputs are ESD-protected and all digital inputs have Schmitt-trigger characteristics. For more details, check the product documentation.

A version with extended operating temperature range of -40°C...85°C (2SP0115T2B0) can also be supplied.

產品規格

產品規格
支持的模組 CM300DX-24T
最大開關頻率 15.00 kHz
IGBT電壓等級 1200 V
技術 SCALE-2
輸出功率/通道 - 最大 1.20 W
接口類型 電氣
IGBT製造商 Mitsubishi/Powerex
通道數 2
閘極峰值電流 (最大) +15 A
產品類別 電路板
Product Sub-Type 隨插即用驅動器
支持的模組種類 IGBT
主/外圍
支持的拓撲
兩電平電壓源
三電平NP鉗位 - 類型1
三電平NP鉗位 - 類型2
多電平NP鉗位
保護功能
高級有源鉗位
過壓
短路
欠壓(次級側)
欠壓(初級側)
驅動模式
半橋
直接獨立
IGBT的連接類型 直接
邏輯輸入電壓 5
電源電壓 (典型) 15.00 V
閘極導通電壓 +15.00 V
閘極關斷電壓 --9.20 V
時間 - 輸出上升 5.00 ns
時間 - 輸出下降 10.00 ns
隔離技術 電隔離
隔離類型 加強型
閘極峰值電流 (最小) -8

資源