解决方案查找器 技術支援

1SP0635S2M1-5SNA1000N330300

Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter

產品規格型錄
下載 PDF 檢視 PDF

產品詳情

1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.  

The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules. 

The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter. 

1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.

The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring. 

Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.

Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available: 

  • 1SP0635V, equipped with Versatile links
  • 1SP0635S, equipped with ST links 

For details, please check the product documentation.

產品規格

產品規格
支持的模組 5SNA1000N330300
最大開關頻率 10.00 kHz
IGBT電壓等級 3300 V
技術 SCALE-2
輸出功率/通道 - 最大 3.00 W
運作溫度 (最小) -40 ℃
運作溫度 (最大) 85 ℃
接口類型 光纖
IGBT製造商 ABB
通道數 1
閘極峰值電流 (最大) +35 A
產品類別 電路板
Product Sub-Type 隨插即用驅動器
支持的模組種類 IGBT
主/外圍 主要
支持的拓撲
兩電平電壓源
三電平NP鉗位 - 類型1
三電平NP鉗位 - 類型2
多電平NP鉗位
保護功能
動態高級有源鉗位
過壓
短路
欠壓(次級側)
驅動模式 直接獨立
IGBT的連接類型 直接
電源電壓 (典型) 15.00 V
閘極導通電壓 +15.00 V
閘極關斷電壓 --10.10 V
電壓 - 直流母線關閉狀態, 60秒 2700.00 V
時間 - 輸出上升 9.00 ns
時間 - 輸出下降 30.00 ns
隔離技術 電隔離
隔離類型 基本
存儲溫度(最低) -40.00 ℃
存儲溫度(最高) 50.00 ℃
閘極峰值電流 (最小) -35

資源