1SP0340
Single-Channel SCALE-2 Plug-and-Play for 4.5kV IGBTs, Direct Paralleling Supported by Master/Slave Drivers
產品
|
產品
|
產品規格型錄
|
最大開關頻率
|
IGBT電壓等級
|
支持的模組
|
支持的模組種類
|
IGBT製造商
|
通道數
|
保形塗層?
|
接口類型
|
邏輯輸入電壓
|
保護功能
|
技術
|
支持的拓撲
|
電源電壓 (典型)
|
閘極導通電壓
|
閘極關斷電壓
|
輸出功率/通道 - 最大
|
閘極峰值電流 (最大)
|
隔離類型
|
隔離技術
|
時間 - 輸出下降
|
時間 - 輸出上升
|
電壓 - 直流母線關閉狀態, 60秒
|
驅動模式
|
IGBT的連接類型
|
主/外圍
|
並行支持?
|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Data Sheet
View Data Sheet
|
|
IGBT Voltage Class
4500 V
|
|
Supported Module Type
IGBT
|
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
8.7 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
CM1200HC-90RA
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Mitsubishi/Powerex
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
CM1500HC-90XA
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Mitsubishi/Powerex
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
3.5 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1200R45HL3
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
2.8 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1800R45HL4
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
2
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
Isolation Type
基本
|
Isolation Technology
電隔離
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
MBN900D45A
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Hitachi
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
MG900GXH1US53
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Toshiba
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
3.5 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1200R45HL3
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
1
|
Conformal Coated?
Yes
|
Interface Type
電氣
|
Logic Input Voltage
15
|
Protection Features
動態高級有源鉗位, 過壓, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
2.8 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1800R45HL4
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
2
|
Conformal Coated?
Yes
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
Isolation Type
基本
|
Isolation Technology
電隔離
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
外圍
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
CM1500HC-90XA
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Mitsubishi/Powerex
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
|
IGBT Voltage Class
4500 V
|
|
Supported Module Type
IGBT
|
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
8.7 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
CM1200HC-90RA
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Mitsubishi/Powerex
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
3.5 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1200R45HL3
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
2.8 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1800R45HL4
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
2
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
Isolation Type
基本
|
Isolation Technology
電隔離
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
MBN900D45A
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Hitachi
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
10.0 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
MG900GXH1US53
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Toshiba
|
Number of Channels
1
|
Conformal Coated?
No
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
3.5 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1200R45HL3
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
1
|
Conformal Coated?
Yes
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
|
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
||
Data Sheet
View Data Sheet
|
Max Switching Frequency
2.8 kHz
|
IGBT Voltage Class
4500 V
|
Supported Module(s)
FZ1800R45HL4
|
Supported Module Type
IGBT
|
IGBT Manufacturer
Infineon
|
Number of Channels
2
|
Conformal Coated?
Yes
|
Interface Type
光纖
|
|
Protection Features
動態高級有源鉗位, 過壓, 短路, 欠壓(次級側)
|
Technology
SCALE-2
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Supply Voltage (Typ)
25 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--10.0 V
|
Power - Output/Channel (Max)
2.8 W
|
Gate Peak Current (Max)
+35 A
|
Isolation Type
基本
|
Isolation Technology
電隔離
|
Time - Output Fall
25 ns
|
Time - Output Rise
10 ns
|
Voltage - DC Link Off state (60s)
3550 V
|
Driving Mode
直接獨立
|
Connection Type to IGBT
直接
|
Main/Peripheral
主要
|
Paralleling Support?
No
|
The new 1SP0340 SCALE-2 Plug-and-Play driver is specifically designed for the reliable and safe driving of 130 x 140 mm and 190 x 140 mm IGBT modules with 6000 V isolation voltage and 4.5 kV blocking voltage. It is optimized for high-reliability applications in the rail industry.
The driver concept relies on a master/slave principle that enables parallel-connected IGBT modules to be operated safely. The master (1SP0340V) can be used as a stand-alone driver without slave to drive a single IGBT module, or with up to three slaves (1SP0340D) to drive up to four parallel-connected IGBT modules.
The master is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master via a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
The 1SP0340 driver is based on the highly-integrated SCALE-2 chipset which enables high-performance, complete and extremely-compact single-channel IGBT drivers.
The SCALE-2 chipset also reduces the component count by 80% when compared to conventional solutions, thus significantly increasing reliability and reducing costs.
1SP0340 drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, regulated turn-on gate driving voltage and supply-voltage-monitoring.
Tightly-matched driver versions are available for all mechanically-compatible IGBT modules. Plug-and-play capability enables immediate operation after mounting, and the user needs to invest no effort adjusting or designing-in the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to electrically isolate the command and status-feedback signals.
For details, please check the product documentation.
Power supply and electrical isolation
In contrast to other SCALE-2 plug-and-play drivers, the 1SP0340 driver is modular, so the driver card and power supply (ISO5125I DC/DC converter) are two separate units. This means that any driver that has been developed to match a specific IGBT module can be used for any required isolation specification. Only the separate power supply (ISO5125I) must be selected to match the specific application. A further benefit is that drivers for 4.5 kV IGBTs can be implemented in 2-level, 3-level and multi-level inverter topologies.
The driver is mounted directly onto the IGBT module using three screws. The separate power supply unit is attached close by the IGBT. For parallel-connected drivers, only one power supply is needed per switch.
Proven high performance of this most compact gate driver solution for 4.5kV IGBT’s with 6kV isolation.