2SC0650P
Dual-channel SCALE-2 driver core with Planar transformers, highest integration level, highest power density for high-power and high-frequency, 50 A gate current and 2 x 6 W output power
애플리케이션
|
제품
|
데이터 시트
|
IGBT 전압 등급
|
채널 수
|
등각 코팅?
|
지원되는 모듈 유형
|
논리 입력 전압
|
보호 기능
|
기술
|
인터페이스 유형
|
지원되는 토폴로지
|
공급 전압 (일반)
|
게이트 턴온 전압
|
게이트 턴 오프 전압
|
출력 전력 / 채널-최대
|
게이트 피크 전류 (최대)
|
격리 유형
|
격리 기술
|
최대 스위칭 주파수
|
시간 - 출력 하락
|
시간 - 출력 상승
|
UL 준수
|
드라이브 모드
|
메인 / 주변
|
모듈 하우징
|
병렬 지원?
|
ROMS
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Data Sheet
View Data Sheet
|
IGBT Voltage Class
1700 V
|
Number of Channels
2
|
Conformal Coated?
No
|
Supported Module Type
IGBT, N채널 MOSFET
|
Logic Input Voltage
5
|
Protection Features
고급 능동 클램핑, 단락, 저전압 (2차측), 저전압 (1차측)
|
Technology
SCALE-2
|
Interface Type
전기
|
Supported Topologies
2단계 전압 소스, 3단계 NP 클램프 - 유형 1, 3단계 NP 클램프 - 유형 2, 다단계 NP 클램프
|
Supply Voltage (Typ)
15 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--11.4 V
|
Power - Output/Channel (Max)
6.5 W
|
Gate Peak Current (Max)
+50 A
|
Isolation Type
강화형
|
Isolation Technology
절연
|
Max Switching Frequency
150.0 kHz
|
Time - Output Fall
25 ns
|
Time - Output Rise
25 ns
|
UL Compliant
준수
|
Driving Mode
하프브리지, 직접 독립형
|
Main/Peripheral
해당 없음
|
Module Housing
모든 인증 방식
|
|
ROMS
아니오
|
|
|
Data Sheet
View Data Sheet
|
IGBT Voltage Class
1700 V
|
Number of Channels
2
|
Conformal Coated?
No
|
Supported Module Type
IGBT, N채널 MOSFET
|
Logic Input Voltage
5
|
Protection Features
고급 능동 클램핑, 단락, 저전압 (2차측), 저전압 (1차측)
|
Technology
SCALE-2
|
Interface Type
전기
|
Supported Topologies
2단계 전압 소스, 3단계 NP 클램프 - 유형 1, 3단계 NP 클램프 - 유형 2, 다단계 NP 클램프
|
Supply Voltage (Typ)
15 V
|
Gate Turn-on Voltage
+15.0 V
|
Gate Turn-off Voltage
--11.4 V
|
Power - Output/Channel (Max)
6.5 W
|
Gate Peak Current (Max)
+50 A
|
Isolation Type
강화형
|
Isolation Technology
절연
|
Max Switching Frequency
150.0 kHz
|
Time - Output Fall
25 ns
|
Time - Output Rise
25 ns
|
UL Compliant
준수
|
Driving Mode
하프브리지, 직접 독립형
|
Main/Peripheral
해당 없음
|
Module Housing
모든 인증 방식
|
Paralleling Support?
No
|
ROMS
아니오
|
제품 상세 정보
The 2SC0650P SCALE-2 dual driver core combines high power density with broad applicability. The driver is designed for both high-power and high-frequency applications requiring maximum reliability. It is suitable for IGBTs with reverse voltages up to 1700 V and also features a dedicated MOSFET mode. An embedded paralleling capability allows simple inverter design at higher power ratings. Multi-level topologies are also supported.
Advantages of the Technology
CONCEPT’s patented planar-transformer technology assures efficient and high-voltage isolation and long-term reliability and enables significant improvements in compactness, interference immunity and performance. Excellent EMC performance with a dv/dt strength of more than 100 V/ns allows safe and reliable operation in even the toughest industrial applications.
The 2SC0650P has a profile of only 6.5 mm and a footprint of 57 x 62 mm. The highly integrated SCALE-2 chipset reduces the component count by up to 85% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
SCALE-2 technology also enables the driver core to operate at switching frequencies of up to 150 kHz – at best-in-class efficiency. The 2SC0650P combines a complete two-channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, Advanced Active Clamping as well as supply voltage monitoring. Each of the two output channels is electrically-isolated from the primary side and the other secondary channel.
IGBT Mode
An output current of 50 A and 6 W drive power is available per channel, making the 2SC0650P a suitable driver both for high-power modules and parallel-connected IGBT modules. In the dedicated IGBT mode, the driver provides a gate voltage swing of +15 V / – 10V. The turn-on voltage is regulated to maintain a stable 15 V regardless of the output power level.
Superior EMC with dv/dt of greater than 100 V/ns allows reliable operation even in the industry’s harshest environments. The 2SC0650P is suited for high-power IGBTs with blocking voltages up to 1700 V.
MOSFET Mode
A dedicated MOSFET mode is implemented in the 2SC0650P. It allows any gate voltage swing of +10 V…+20 V / 0 V to make the most of the driver’s 150 kHz switching speed.
With its high output power, very short delay, and extremely small jitter, the 2SC0650P driver core has been specifically designed for high-power and ultra-fast switching, fully exploiting the capabilities of state-of-the-art MOS power devices.
Benefits in Fast-Switching Applications
Fast switching not only requires high drive power and maximum frequency but also relies on tight control over crucial parameters such as the driver’s delay time and the associated jitter. A fast driver with a short delay introduces significantly less phase lag into the power system’s control loop. This is of great importance when maintaining the stability of the control loop as it allows the benefits of fast switching to be fully exploited.
The 2SC0650P shares the SCALE-2 performance figures for fast signal transmission delivering less than 80ns delay time and an extremely low jitter of less than ±2 ns. It is this combination of high output power and stable precision that makes the 2SC0650P a suitable choice for highly optimized systems, where tight control over timing margins is mandatory.
Driving Parallel-Connected IGBTs
The driver allows direct parallel connection of any number of IGBT modules with individual drivers. This new pioneering concept makes it practical for the first time to build a converter series with discrete modules as well as parallel-connected IGBTs without any significant additional development effort.
Use of planar transformer technology leads to low transformer stray inductance, ultra-flat design and extrem power density.
- Ultra-flat solution
- Planar transformer isolation
- Blocking voltages up to 1700V
- Switching frequency up to 150kHz
- Very short delay time of <80ns
- Extremely small jitter of <±1ns
- High gate current ±50A
- Schmitt-trigger inputs
- Interface for 3.3V...15V logic level
- Compatible to all logic families
- Direct and half-bridge modes
- Embedded paralleling capability
- 2-level and multilevel topologies
- IGBT short-circuit protection
- Advanced Active Clamping
- Isolated DC/DC converter
- 2 x 6W output power
- Supply under-voltage lockout
- Safe isolation to EN50178
- UL compliant
- Superior EMC
- Reliable, long service life
