2SC0115T
Smallest IGBT gate-driver for 90 kW-500 kW inverters, SCALE-2+ Technology, galvanic solution for 1200 V IGBT drivers, advanced active clamping or SSD
應用
|
產品
|
產品規格型錄
|
IGBT電壓等級
|
通道數
|
保形塗層?
|
驅動模式
|
閘極峰值電流 (最大)
|
閘極關斷電壓
|
隔離技術
|
接口類型
|
保護功能
|
隔離類型
|
邏輯輸入電壓
|
主/外圍
|
最大開關頻率
|
選項信息
|
閘極導通電壓
|
支持的模組種類
|
支持的拓撲
|
輸出功率/通道 - 最大
|
並行支持？
|
電源電壓 (典型)
|
時間 - 輸出下降
|
時間 - 輸出上升
|
技術
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Data Sheet
View Data Sheet
|
IGBT Voltage Class
1200 V
|
Number of Channels
1
|
Conformal Coated?
No
|
Driving Mode
直接獨立
|
Gate Peak Current (Max)
+15 A
|
Gate Turn-off Voltage
--8.5 V
|
Isolation Technology
電隔離
|
Interface Type
電氣
|
Protection Features
高級有源鉗位, 短路, 欠壓（次級側）, 欠壓（初級側）
|
Isolation Type
加強型
|
Logic Input Voltage
5
|
Main/Peripheral
無
|
Max Switching Frequency
50.0 kHz
|
Options Info
Conformal Coated Version 2SC0115T2A0C-12
|
Gate Turn-on Voltage
+15.0 V
|
Supported Module Type
IGBT, N溝道MOSFET
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Power - Output/Channel (Max)
1.4 W
|
|
Supply Voltage (Typ)
15 V
|
Time - Output Fall
12 ns
|
Time - Output Rise
6 ns
|
Technology
SCALE-2+
|
|
|
Data Sheet
View Data Sheet
|
IGBT Voltage Class
1200 V
|
Number of Channels
1
|
Conformal Coated?
Yes
|
Driving Mode
直接獨立
|
Gate Peak Current (Max)
+15 A
|
Gate Turn-off Voltage
--8.5 V
|
Isolation Technology
電隔離
|
Interface Type
電氣
|
Protection Features
高級有源鉗位, 短路, 欠壓（次級側）, 欠壓（初級側）
|
Isolation Type
加強型
|
Logic Input Voltage
5
|
Main/Peripheral
無
|
Max Switching Frequency
50.0 kHz
|
|
Gate Turn-on Voltage
+15.0 V
|
Supported Module Type
IGBT, N溝道MOSFET
|
Supported Topologies
兩電平電壓源, 三電平NP鉗位 - 類型1, 三電平NP鉗位 - 類型2, 多電平NP鉗位
|
Power - Output/Channel (Max)
1.4 W
|
Paralleling Support?
No
|
Supply Voltage (Typ)
15 V
|
Time - Output Fall
12 ns
|
Time - Output Rise
6 ns
|
Technology
SCALE-2+
|
產品詳情
Leveraging SCALE-2+ integrated circuit and isolated transformer technology for DC/DC power and switching signal transmission, the new 2SC0115T IGBT driver core improves system reliability and performance by eliminating the need for an opto-coupler. The IGBT driver core’s reinforced electrical isolation targets systems with a working voltage of 900 V, which is typical for 1200 V IGBT modules and complies with the PD2 and OV II requirements of IEC 60664-1 and IEC 61800-5-1. The 2SC0115T IGBT gate driver core supports modules up to 2400 A and switching frequencies of up to 50 kHz.
- SCALE-2+ chip set
- Available with Conformal Coating
- Programmable SSD and AAC function
- New Pin length for 2mm PCB's (2.54mm; 3.1mm; 5.84mm)
- New pins for hand-, wave-and selective soldering processes
- All lead free
- All with EMC improved technology
- 100% downward compatible
- Dual-channel driver core for up to 1200 V
- ±15A gate current, +15 V/-6 V
- 1.2 W max. per channel
- On-board regulated power supply
- Soft Shut Down (SSD) or Advanced Active Clamping (AAC)
- High reliability (reduced component count)First-class isolation technology
- Partial-discharge-tested isolation technology
- Delay time <100 ns, up to 50 kHz
- Isolation coordination with working voltage 900V according to IEC 61800-5-1 and IEC 60664-1
- -40°C to +105°C (105°C with derating)
- RoHS compliant
- No change in electrical and mechanical performance
- UL Recognized Component
