2SP0215F2Q0C-FF900R12ME7W_B11
ASIL-certified plug-and-play dual-channel gate driver boards for Infineon™ EconoDUAL™ 17-mm IGBT power modules up to 1200 V
應用
產品詳情
The 2SP0215F2Q0C is a dual channel gate driver for Infineon™ EconoDUAL™ 17 mm modules driving IGBT switches. The Plug-and-Play gate driver board is designed for applications requiring automotive qualification like electronic buses, electronic trucks, battery electrical vehicles, hybrid electrical vehicles or fuel cell inverters operating up to 1000 V battery voltage.
The gate driver provides automotive related protection functionalities and diagnostics. A galvanic isolated IGBT module integrated NTC read-out provides IGBT module temperature information.
Product Highlights
- Ready-to-use dual channel gate driver solution for EconoDUAL™
- 7 mm IGBT power modules up to 1200 V
- Primary-side electrical interface with reinforced isolation
- +20 A / -15 A peak output gate current
- Up to 20 kHz switching frequency
- Gate power of 1.5 W per channel at maximum ambient temperature
- Digital Communication Interface
- -40 °C to +85 °C operating ambient temperature
- Operation up to 5500 m altitude
- High common-mode transient immunity
Protection, Safety and Diagnostic Features
- 5 V input logic
- DC-link Active Discharge (AD) function (Optional)
- Motor Active Short Circuit (ASC) function (Optional)
- Galvanically isolated analog temperature measurement for module integrated NTC elements
- Rail-to-rail stabilized secondary-side output voltage
- Integrated FluxLink™ technology providing reinforced isolation barrier between primary-side and secondary-side
- Advanced Resistive Overvoltage Control (AROC) controlled soft turn-off in response to any critical failure
- Internal communication monitoring
- Undervoltage monitoring (UVLO) for primary-side and secondary-side
- Secondary-side overvoltage monitoring (OVLO)
- Gate monitoring
- Two-stage primary-side and secondary-side die temperature monitoring
- Desaturation monitoring
- DC/DC controller over current monitoring
- Separate isolated digital failure and status outputs
- Active Miller clamp
- Conformal coating
Full Safety and Regulatory Compliance
- ASIL-B certification (pending)
- Clearance and creepage distances between primary and secondary sides meet requirements for reinforced isolation (according to IEC 60664-1, IEC 60664-3)
- SEooC product certification (pending)
- 100% production partial discharge test
- 100% production HIPOT testing at 4000 kVRMS for 1 s
Applications
- E-Bus and E-Truck traction inverter
- Diesel-electric traction inverter
- Fuel cell inverter
- Agricultural and construction vehicles and equipment
- Other automotive and industrial applications
產品規格
支持的模組 | FF900R12ME7W_B11 |
IGBT電壓等級 | 1200 V |
技術 | SCALE-2 |
產品類別 | 隨插即用驅動器 |
輸出功率/通道 - 最大 | 1.50 W |
運作溫度 (最小) | -20 ℃ |
運作溫度 (最大) | 50 ℃ |
接口類型 | 電氣 |
模組外殼 | 17mm |
IGBT製造商 | Infineon |
通道數 | 2 |
閘極峰值電流 (最大) | +29 A |
產品類別 | 電路板 |
Product Sub-Type | 隨插即用驅動器 |
支持的模組種類 | IGBT |
支持的拓撲 | Integrated Half-Bridge |
保護功能 |
高級有源鉗位
過壓
短路
欠壓(次級側)
欠壓(初級側)
|
驅動器監控 | 無 |
保形塗層? | 是 |
IGBT的連接類型 | 直接 |
邏輯輸入電壓 | 5 |
電源電壓 (典型) | 5.00 V |
閘極導通電壓 | +15.00 V |
閘極關斷電壓 | -9.20 V |
電壓 - 直流母線切換 | 1200.00 V |
時間 - 輸出上升 | 5.00 ns |
時間 - 輸出下降 | 10.00 ns |
封裝 | 電路板 |
隔離技術 | 電隔離 |
隔離類型 | 加強型 |
存儲溫度(最低) | -40.00 ℃ |
存儲溫度(最高) | 50.00 ℃ |
ISO26262 功能安全等級 | ASIL B |