1SP0635D2S1C-TIM1500ESM33-PSA012
Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter
產品詳情
1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.
The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules.
The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.
The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring.
Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available:
- 1SP0635V, equipped with Versatile links
- 1SP0635S, equipped with ST links
For details, please check the product documentation.
產品規格
支持的模組 | TIM1500ESM33-PSA012 |
最大開關頻率 | 5.50 kHz |
IGBT電壓等級 | 3300 V |
技術 | SCALE-2 |
輸出功率/通道 - 最大 | 2.60 W |
運作溫度 (最小) | -40 ℃ |
運作溫度 (最大) | 85 ℃ |
接口類型 | 電氣 |
IGBT製造商 | CRRC |
通道數 | 1 |
閘極峰值電流 (最大) | +35 A |
產品類別 | 電路板 |
Product Sub-Type | 隨插即用驅動器 |
支持的模組種類 | IGBT |
主/外圍 | 外圍 |
支持的拓撲 |
兩電平電壓源
三電平NP鉗位 - 類型1
三電平NP鉗位 - 類型2
多電平NP鉗位
|
保護功能 |
動態高級有源鉗位
過壓
欠壓(次級側)
|
保形塗層? | 是 |
驅動模式 | 直接獨立 |
IGBT的連接類型 | 直接 |
邏輯輸入電壓 | 15 |
閘極導通電壓 | +15.00 V |
閘極關斷電壓 | --10.10 V |
電壓 - 直流母線關閉狀態, 60秒 | 2700.00 V |
時間 - 輸出上升 | 9.00 ns |
時間 - 輸出下降 | 30.00 ns |
存儲溫度(最低) | -40.00 ℃ |
存儲溫度(最高) | 50.00 ℃ |
閘極峰值電流 (最小) | -35 |