์†”๋ฃจ์…˜ ์ฐพ๊ธฐ ๊ธฐ์ˆ  ์ง€์›

Photovoltaic

Photovoltaic IconEfficiency is one of the major challenges that solar energy installations must address โ€“ not only from a technical, but also from an economic standpoint.

Cost-optimized driver solutions are realized using Power Integrations' highly-integrated SCALE and SCALE-2 gate drivers, which enable a significant reduction in both component count and PCB size over typical solutions based on discrete driver stages. Integration also results in increased reliability as fewer components means less potential causes for malfunction. Therefore, the overall system MTBF (Mean Time Between Failure) is improved using SCALE and SCALE-2 gate drivers.

One of the technical challenges related to solar applications concerns over-voltage protection.

During normal operation โ€“ when the load is connected at standard temperatures - the DC-link voltage of a solar inverter is relatively low compared to the maximum blocking capability of the power switches. Therefore, there is enough voltage โ€˜headroomโ€™ to handle any over-voltages that may occur when the power switches are turned off. Reliable protection of these switches using active clamping methods is, therefore, easy to achieve.

However, the open circuit voltage of a solar inverter (more precisely, of the solar panels), in particular at low temperatures, can lead to an increased DC-link voltage close to the maximum blocking capability of the power switches. During this period any standard active clamping circuit could cause an unintended turn-on of the power switches. In the best case, this would result in additional losses and increased EMI - however in a worst-case-scenario the result could be the complete destruction of the solar converter.

To address this situation, Power Integrations has developed a sophisticated active clamping technique, named โ€˜Dynamic Advanced Active Clamping (DAยฒC)โ€™, which activates and deactivates the clamping function automatically, allowing solar inverter to operate safely under all application conditions (see figure 2).

 

Fig. 2 Dynamic Advanced Active Clamping (DAยฒC)

๊ด€๋ จ ์ƒํ’ˆ

Related Products
์ œํ’ˆ
๋ฐ์ดํ„ฐ ์‹œํŠธ
ํ† ํด๋กœ์ง€
์„ค๋ช…
Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

๋‹จ์ผ LV100(Mitsubishi), XHPโ„ข 2(Infineon), HPnC(Fuji) ๋ฐ ๋™๋“ฑํ•œ ๋ฐ˜๋„์ฒด ๋ชจ๋“ˆ(์ตœ๋Œ€ 2300V ์ฐจ๋‹จ ์ „์••)์˜ ์ž‘๋™์„ ์œ„ํ•œ ๋“€์–ผ ์ฑ„๋„ ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๊ฒŒ์ดํŠธ ๋“œ๋ผ์ด๋ฒ„๋กœ, ์ „๊ธฐ ์ธํ„ฐํŽ˜์ด์Šค, NTC ์ฝ๊ธฐ ๋ฐ ๋‚ด์žฅ DC-DC ์ „์›์„ ๊ฐ–์ถ”๊ณ  ์žˆ์Šต๋‹ˆ๋‹ค.

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2
Description

Gate Driver for Driving 62mm SiC-MOSFET and Si-IGBT modules up to 1700 V via Electrical Interface

Topology 2-level Voltage Source
Description

์ „๊ธฐ์  ์ธํ„ฐํŽ˜์ด์Šค๋ฅผ ํ†ตํ•œ NTC(๋งˆ์ด๋„ˆ์Šค ์˜จ๋„ ๊ณ„์ˆ˜) ์˜จ๋„ ์„ผ์‹ฑ ๊ธฐ๋Šฅ์ด ์žˆ๋Š” ํ•˜ํ”„ ๋ธŒ๋ฆฌ์ง€ ์ „๋ ฅ ๋ชจ๋“ˆ์„ ๊ตฌ๋™ํ•˜๊ธฐ ์œ„ํ•œ ๋“€์–ผ ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๊ฒŒ์ดํŠธ ๋“œ๋ผ์ด๋ฒ„

Topology 2-level Voltage Source
Description

EconoDUALโ„ข ๋ฐ ๋™๊ธ‰ 17mm ๋ชจ๋“ˆ์šฉ ๋“€์–ผ ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๊ฒŒ์ดํŠธ ๋“œ๋ผ์ด๋ฒ„, ํŠนํžˆ 3~5MW ๋ฒ”์œ„์˜ ํ•ด์ƒ ํ’๋ ฅ ํ„ฐ๋นˆ์— ์ ํ•ฉ

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1
Description

์ตœ๋Œ€ 3.3kV์˜ 100x140mm IGBT ๋ชจ๋“ˆ์šฉ ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๊ฒŒ์ดํŠธ ๋“œ๋ผ์ด๋ฒ„, ํŠนํžˆ ์ „๊ธฐ ์ฒ ๋„ ์—ด์ฐจ ๋ฐ ํŠธ๋žจ์— ์ ํ•ฉํ•ฉ๋‹ˆ๋‹ค.

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

์ตœ๋Œ€ 3.3kV์˜ 100x40mm IGBT/SiC ๋ชจ๋“ˆ ๋ณ‘๋ ฌ ์—ฐ๊ฒฐ์„ ์œ„ํ•œ ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๊ฒŒ์ดํŠธ ๋“œ๋ผ์ด๋ฒ„

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1
Description

1200V ๋ฐ 1700 V PrimePACK3+ IGBT ๋ชจ๋“ˆ์šฉ ๋“€์–ผ ์ฑ„๋„ SCALE-2 ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๋“œ๋ผ์ด๋ฒ„

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Smallest IGBT gate-driver for 90 kW-500 kW inverters, SCALE-2+ Technology, galvanic solution for 1200 V IGBT drivers, advanced active clamping or SSD

Topology 2-level Voltage Source
Description

Dual-channel SCALE-2+ driver core, highest integration level for inverter designs from 37 to 110 kVA, integrated short-circuit soft shutdown function

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Plug-and-Play Driver for PrimePACKโ„ข IGBT Modules, Electrical or Fiber-Optic Interface, Embedded Paralleling Capability

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Plug-and-Play Driver for 17mm IGBT Modules, Full Function Across the Range, Embedded Paralleling Capability

Topology 2-level Voltage Source
Description

Dual-channel SCALE-2 driver core, highest integration level, second source for Infineonโ„ข 2ED300C17-S, 30 A gate current and 2 x 4 W drive power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-Channel SCALE-2 Driver Core for 3.3 kV IGBTs, highest intergration level, compact, high-voltage, high-power, 35 A gate current and 2 x 5 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2 driver core with Planar transformers, highest integration level, highest power density for high-power and high-frequency, 50 A gate current and 2 x 6 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2+ driver core used by new 2SC0435T2F1-17, 2SC0435T2G1-17, 2SC0435T2H0-17, highest integration level, ultra-compact, high-quality 35 A gate current, and 2 x 4 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Dual-channel SCALE-2+ driver core, highest integration level ultra-compact, high-quality 8A gate current and 2 x 1 W output power

Topology 2-level Voltage Source, 3-level NP-Clamped - Type 1, 3-level NP-Clamped - Type 2, Multi-Level NP-Clamped
Description

Single-channel SCALE-2 driver core with Planar transformers, 60 A gate current for driving large IGBT modules in parallel, 20 W output power for high-frequency applications up to 500 kHz

์ถ”๊ฐ€ ๋ฌธ์„œ