์†”๋ฃจ์…˜ ์ฐพ๊ธฐ ๊ธฐ์ˆ  ์ง€์›

1SP0635S2M1-FZ2400R33HE4

Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter

์• ํ”Œ๋ฆฌ์ผ€์ด์…˜
๋ฐ์ดํ„ฐ ์‹œํŠธ
PDF ๋‹ค์šด๋กœ๋“œ PDF ๋ณด๊ธฐ

์ œํ’ˆ ์ƒ์„ธ ์ •๋ณด

1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.  

The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules. 

The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter. 

1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.

The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring. 

Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.

Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available: 

  • 1SP0635V, equipped with Versatile links
  • 1SP0635S, equipped with ST links 

For details, please check the product documentation.

๋ช…์„ธ์„œ

๋ช…์„ธ์„œ
์ง€์›๋˜๋Š” ๋ชจ๋“ˆ FZ2400R33HE4
์ตœ๋Œ€ ์Šค์œ„์นญ ์ฃผํŒŒ์ˆ˜ 2.60 kHz
IGBT ์ „์•• ๋“ฑ๊ธ‰ 3300 V
๊ธฐ์ˆ  SCALE-2
์ถœ๋ ฅ ์ „๋ ฅ / ์ฑ„๋„-์ตœ๋Œ€ 3.00 W
์ž‘๋™ ์˜จ๋„ (์ตœ์†Œ) -40 โ„ƒ
์ž‘๋™ ์˜จ๋„ (์ตœ๋Œ€) 85 โ„ƒ
์ธํ„ฐํŽ˜์ด์Šค ์œ ํ˜• ๊ด‘์„ฌ์œ 
IGBT ์ œ์กฐ์—…์ฒด Infineon
์ฑ„๋„ ์ˆ˜ 1
๊ฒŒ์ดํŠธ ํ”ผํฌ ์ „๋ฅ˜ (์ตœ๋Œ€) +35 A
์ƒํ’ˆ ์œ ํ˜• ํšŒ๋กœ ๊ธฐํŒ
Product Sub-Type ํ”Œ๋Ÿฌ๊ทธ ์•ค ํ”Œ๋ ˆ์ด ๋“œ๋ผ์ด๋ฒ„
์ง€์›๋˜๋Š” ๋ชจ๋“ˆ ์œ ํ˜• IGBT
๋ฉ”์ธ / ์ฃผ๋ณ€ ๋ฉ”์ธ
์ง€์›๋˜๋Š” ํ† ํด๋กœ์ง€
2๋‹จ๊ณ„ ์ „์•• ์†Œ์Šค
3๋‹จ๊ณ„ NP ํด๋žจํ”„ - ์œ ํ˜• 1
3๋‹จ๊ณ„ NP ํด๋žจํ”„ - ์œ ํ˜• 2
๋‹ค๋‹จ๊ณ„ NP ํด๋žจํ”„
๋ณดํ˜ธ ๊ธฐ๋Šฅ
๋™์  ๊ณ ๊ธ‰ ๋Šฅ๋™ ํด๋žจํ•‘
๊ณผ์ „์••
๋‹จ๋ฝ
์ €์ „์•• (2์ฐจ์ธก)
๋“œ๋ผ์ด๋ธŒ ๋ชจ๋“œ ์ง์ ‘ ๋…๋ฆฝํ˜•
IGBT์— ๋Œ€ํ•œ ์—ฐ๊ฒฐ ์œ ํ˜• Direct
๊ฒŒ์ดํŠธ ํ„ด์˜จ ์ „์•• +15.00 V
๊ฒŒ์ดํŠธ ํ„ด ์˜คํ”„ ์ „์•• --10.00 V
์ „์•• - DC ๋งํฌ ๊บผ์ง ์ƒํƒœ, 60 ์ดˆ 2700.00 V
์‹œ๊ฐ„ - ์ถœ๋ ฅ ์ƒ์Šน 9.00 ns
์‹œ๊ฐ„ - ์ถœ๋ ฅ ํ•˜๋ฝ 30.00 ns
๊ฒฉ๋ฆฌ ๊ธฐ์ˆ  ์ ˆ์—ฐ
๊ฒฉ๋ฆฌ ์œ ํ˜• ๊ธฐ๋ณธ
๋ณด๊ด€ ์˜จ๋„ (์ตœ์†Œ) (ยฐC) -40.00 โ„ƒ
๋ณด๊ด€ ์˜จ๋„ (์ตœ๋Œ€) (ยฐC) 50.00 โ„ƒ

๋ฆฌ์†Œ์Šค