솔루션 찾기 기술 지원

1SP0635D2S1-17

Single-Channel Plug-and-Play Driver with Master/Slave Operation, Drives IGBTs from 1200V to 3300V with On-board DC/DC Converter

애플리케이션

제품 상세 정보

1SP0635 SCALE-2 Plug-and-Play drivers safely and reliably drive 130 x 140 mm and 190 x 140 mm high-voltage and high-power IGBT modules ranging from 1200 V to 3300 V. They are optimised for use in high-reliability applications in the rail industry.  

The drivers operate in a master/slave configuraion that allows the safe operation of parallel-connected IGBT modules. The master (1SP0635V or 1SP0635S) can be used as a stand-alone driver without slave to drive a single IGBT module or it can be used with up to three slaves (1SP0635D) to drive up to four parallel-connected IGBT modules. 

The master drive is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master by a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter. 

1SP0635 drivers are based on Power Integrations' highly-integrated SCALE-2 chipset. Therefore the single-channel drivers are high-performance, complete and extremely compact. The SCALE-2 chipset also reduces the component count by up to 80% compared to conventional solutions, thus significantly increasing reliability and reducing costs.

The drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, built-in DC/DC converters, regulated turn-on gate driving voltage and supply-voltage monitoring. 

Perfectly-matched drivers are available for all mechanically-compatible IGBT modules. Plug-and-play configuration allows immediate operation after mounting, so the user needs to invest no time and effort in designing or adjusting the driver for a specific application.

Fiber-Optic Interface Options
Fiber-optic links are used to provide electrical insulation for the command and status-feedback signals. Two versions of fiber-optic interfaces are available: 

  • 1SP0635V, equipped with Versatile links
  • 1SP0635S, equipped with ST links 

For details, please check the product documentation.

명세서

명세서
IGBT 전압 등급 1700 V
기술 SCALE-2
출력 전력 / 채널-최대 3.00 W
작동 온도 (최소) -40 ℃
작동 온도 (최대) 85 ℃
인터페이스 유형 광섬유
채널 수 1
게이트 피크 전류 (최대) +35 A
상품 유형 회로 기판
Product Sub-Type 플러그 앤 플레이 드라이버
지원되는 모듈 유형 IGBT
메인 / 주변 주변
지원되는 토폴로지
2단계 전압 소스
3단계 NP 클램프 - 유형 1
3단계 NP 클램프 - 유형 2
다단계 NP 클램프
보호 기능
동적 고급 능동 클램핑
과전압
단락
저전압 (2차측)
드라이브 모드 직접 독립형
IGBT에 대한 연결 유형 Direct
게이트 턴온 전압 +15.00 V
게이트 턴 오프 전압 --10.10 V
전압 - DC 링크 꺼짐 상태, 60 초 1480.00 V
시간 - 출력 상승 9.00 ns
시간 - 출력 하락 30.00 ns
격리 기술 절연
격리 유형 강화형
보관 온도 (최소) (°C) -40.00 ℃
보관 온도 (최대) (°C) 90.00 ℃
게이트 피크 전류 (최소) -35

리소스