![SCALE-2 1SP0340 Module SCALE-2 1SP0340 Module](/sites/default/files/images/products/PI-1600x1200%402x_SCALE-2-1SP0340.png)
1SP0340D2S0-MBN900D45A
Single-Channel SCALE-2 Plug-and-Play for 4.5kV IGBTs, Direct Paralleling Supported by Master/Slave Drivers
제품 상세 정보
The new 1SP0340 SCALE-2 Plug-and-Play driver is specifically designed for the reliable and safe driving of 130 x 140 mm and 190 x 140 mm IGBT modules with 6000 V isolation voltage and 4.5 kV blocking voltage. It is optimized for high-reliability applications in the rail industry.
The driver concept relies on a master/slave principle that enables parallel-connected IGBT modules to be operated safely. The master (1SP0340V) can be used as a stand-alone driver without slave to drive a single IGBT module, or with up to three slaves (1SP0340D) to drive up to four parallel-connected IGBT modules.
The master is equipped with a fiber-optic interface and global fault management. In master/slave configurations, the slaves are connected to the master via a bus cable which distributes the common command signal and the secondary-side supply voltages from the DC/DC converter.
The 1SP0340 driver is based on the highly-integrated SCALE-2 chipset which enables high-performance, complete and extremely-compact single-channel IGBT drivers.
The SCALE-2 chipset also reduces the component count by 80% when compared to conventional solutions, thus significantly increasing reliability and reducing costs.
1SP0340 drivers are equipped with Dynamic Advanced Active Clamping (DA2C), short-circuit protection, regulated turn-on gate driving voltage and supply-voltage-monitoring.
Tightly-matched driver versions are available for all mechanically-compatible IGBT modules. Plug-and-play capability enables immediate operation after mounting, and the user needs to invest no effort adjusting or designing-in the driver for a specific application.
Fiber-Optic Interface Options
Fiber-optic links are used to electrically isolate the command and status-feedback signals.
For details, please check the product documentation.
Power supply and electrical isolation
In contrast to other SCALE-2 plug-and-play drivers, the 1SP0340 driver is modular, so the driver card and power supply (ISO5125I DC/DC converter) are two separate units. This means that any driver that has been developed to match a specific IGBT module can be used for any required isolation specification. Only the separate power supply (ISO5125I) must be selected to match the specific application. A further benefit is that drivers for 4.5 kV IGBTs can be implemented in 2-level, 3-level and multi-level inverter topologies.
The driver is mounted directly onto the IGBT module using three screws. The separate power supply unit is attached close by the IGBT. For parallel-connected drivers, only one power supply is needed per switch.
명세서
지원되는 모듈 | MBN900D45A |
최대 스위칭 주파수 | 10.00 kHz |
IGBT 전압 등급 | 4500 V |
기술 | SCALE-2 |
출력 전력 / 채널-최대 | 2.80 W |
인터페이스 유형 | 전기 |
IGBT 제조업체 | Hitachi |
채널 수 | 1 |
게이트 피크 전류 (최대) | +35 A |
상품 유형 | 회로 기판 |
Product Sub-Type | 플러그 앤 플레이 드라이버 |
지원되는 모듈 유형 | IGBT |
메인 / 주변 | 주변 |
지원되는 토폴로지 |
2단계 전압 소스
3단계 NP 클램프 - 유형 1
3단계 NP 클램프 - 유형 2
다단계 NP 클램프
|
보호 기능 |
동적 고급 능동 클램핑
과전압
저전압 (2차측)
|
드라이브 모드 | 직접 독립형 |
IGBT에 대한 연결 유형 | Direct |
논리 입력 전압 | 15 |
공급 전압 (일반) | 25.00 V |
게이트 턴온 전압 | +15.00 V |
게이트 턴 오프 전압 | --10.00 V |
전압 - DC 링크 꺼짐 상태, 60 초 | 3550.00 V |
시간 - 출력 상승 | 10.00 ns |
시간 - 출력 하락 | 25.00 ns |
게이트 피크 전류 (최소) | -35 |